Indice del forum www.zeroshell.net
Distribuzione Linux ZeroShell
 
 FAQFAQ   CercaCerca  GruppiGruppi   RegistratiRegistrati 
 ProfiloProfilo  Log inLog in   Messaggi privatiMessaggi privati 

CHIAVETTA LTE 4G ZTE MF823.....non va

 
Nuovo argomento   Rispondi    Indice del forum -> ZeroShell
Precedente :: Successivo  
Autore Messaggio
m.bellizzi



Registrato: 01/09/16 17:31
Messaggi: 2

MessaggioInviato: Gio Set 01, 2016 10:16 pm    Oggetto: CHIAVETTA LTE 4G ZTE MF823.....non va Rispondi citando

ho installato su alix:
zeroshell 3.6.0
kernel 4.4.13-ZS
e tutto funzionava perfettamente.

Adeso sto sbattendo da un p˛ nel far riconoscere la chiavetta usb LTE 4G ZTE MF823 senza risultati.

Viene riconosciuta come cdc_ether ma nella gui non la vedo da nessuna parte.

Qualcuno ha risolto queto problema?
Grazie

Dal comando dmesg ottengo:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.13-ZS (root@81.example.com) (gcc version 4.9.2 (GCC) ) #1 SMP Mon Jun 20 18:25:09 CEST 2016
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x10000 max_arch_pfn = 0x100000
[ 0.000000] MTRR: Disabled
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x01998000, 0x0199afff] PGTABLE
[ 0.000000] BRK [0x0199b000, 0x0199bfff] PGTABLE
[ 0.000000] BRK [0x0199c000, 0x0199cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x0f208000-0x0f9f1fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20150930/tbxfroot-243)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 10000000
[ 0.000000] low ram: 0 - 10000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000fffffff]
[ 0.000000] On node 0 totalpages: 65439
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 61440 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] e820: [mem 0x10000000-0xffefffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @cfdd3000 s43980 r0 d29748 u73728
[ 0.000000] pcpu-alloc: s43980 r0 d29748 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64927
[ 0.000000] Kernel command line: BOOT_IMAGE=/1/4.4.13-ZS/vmlinuz root=HD=ZS-36533B79_3.6.0_1 quiet
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 241304K/261756K available (6105K kernel code, 662K rwdata, 1824K rodata, 568K init, 596K bss, 20452K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff5b5000 - 0xfffff000 (10536 kB)
[ 0.000000] pkmap : 0xff000000 - 0xff400000 (4096 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xfeffe000 ( 743 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] .init : 0xc1867000 - 0xc18f5000 ( 568 kB)
[ 0.000000] .data : 0xc15f6b45 - 0xc18659c0 (2491 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15f6b45 (6106 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:8448 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=cec1a000 soft=cec1c000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 498.054 MHz processor
[ 0.008030] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.10 BogoMIPS (lpj=1992216)
[ 0.008053] pid_max: default: 32768 minimum: 301
[ 0.008199] Security Framework initialized
[ 0.008212] Yama: becoming mindful.
[ 0.008288] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.008307] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.009349] Initializing cgroup subsys io
[ 0.009376] Initializing cgroup subsys devices
[ 0.009397] Initializing cgroup subsys freezer
[ 0.009420] Initializing cgroup subsys net_cls
[ 0.012076] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.012093] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.037505] Freeing SMP alternatives memory: 28K (c18f5000 - c18fc000)
[ 0.041061] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.041075] smpboot: SMP motherboard not detected
[ 0.041085] smpboot: SMP disabled
[ 0.041098] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.041226] Performance Events: no PMU driver, software events only.
[ 0.042678] Huh? What family is it: 0x5?!
[ 0.042692] MCE: In-kernel MCE decoding enabled.
[ 0.042709] x86: Booted up 1 node, 1 CPUs
[ 0.042725] smpboot: Total of 1 processors activated (996.10 BogoMIPS)
[ 0.043320] devtmpfs: initialized
[ 0.046776] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.047231] pinctrl core: initialized pinctrl subsystem
[ 0.048433] NET: Registered protocol family 16
[ 0.049839] cpuidle: using governor ladder
[ 0.049868] cpuidle: using governor menu
[ 0.050641] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.052699] PCI: PCI BIOS revision 2.10 entry at 0xfcf35, last bus=0
[ 0.052712] PCI: Using configuration type 1 for base access
[ 0.096619] ACPI: Interpreter disabled.
[ 0.097415] vgaarb: loaded
[ 0.098131] SCSI subsystem initialized
[ 0.098912] libata version 3.00 loaded.
[ 0.099814] usbcore: registered new interface driver usbfs
[ 0.100363] usbcore: registered new interface driver hub
[ 0.100495] usbcore: registered new device driver usb
[ 0.103030] dmi: Firmware registration failed.
[ 0.103347] PCI: Probing PCI hardware
[ 0.103363] PCI: root bus 00: using default resources
[ 0.103377] PCI: Probing PCI hardware (bus 00)
[ 0.103548] PCI host bridge to bus 0000:00
[ 0.103575] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.103600] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.103621] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.103687] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
[ 0.103739] pci 0000:00:01.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
[ 0.104385] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
[ 0.104456] pci 0000:00:01.2: reg 0x10: [mem 0xefff4000-0xefff7fff]
[ 0.104985] pci 0000:00:09.0: [1106:3053] type 00 class 0x020000
[ 0.105037] pci 0000:00:09.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.105071] pci 0000:00:09.0: reg 0x14: [mem 0xe0000000-0xe00000ff]
[ 0.105168] pci 0000:00:09.0: supports D1 D2
[ 0.105192] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105543] pci 0000:00:0a.0: [1106:3053] type 00 class 0x020000
[ 0.105595] pci 0000:00:0a.0: reg 0x10: [io 0x1400-0x14ff]
[ 0.105628] pci 0000:00:0a.0: reg 0x14: [mem 0xe0040000-0xe00400ff]
[ 0.105723] pci 0000:00:0a.0: supports D1 D2
[ 0.105743] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.106095] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
[ 0.106220] pci 0000:00:0f.0: reg 0x10: [io 0x6000-0x6007]
[ 0.106328] pci 0000:00:0f.0: reg 0x14: [io 0x6100-0x61ff]
[ 0.106434] pci 0000:00:0f.0: reg 0x18: [io 0x6200-0x623f]
[ 0.106594] pci 0000:00:0f.0: reg 0x20: [io 0x9d00-0x9d7f]
[ 0.106701] pci 0000:00:0f.0: reg 0x24: [io 0x9c00-0x9c3f]
[ 0.107252] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
[ 0.107497] pci 0000:00:0f.2: reg 0x20: [io 0xff00-0xff0f]
[ 0.107610] pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.107632] pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.107654] pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.107675] pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.108522] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
[ 0.108641] pci 0000:00:0f.4: reg 0x10: [mem 0xefffe000-0xefffefff]
[ 0.108933] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.109433] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
[ 0.109551] pci 0000:00:0f.5: reg 0x10: [mem 0xefffd000-0xefffdfff]
[ 0.109847] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.110227] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.110512] PCI: pci_cache_line_size set to 32 bytes
[ 0.111857] NetLabel: Initializing
[ 0.111871] NetLabel: domain hash size = 128
[ 0.111882] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.111964] NetLabel: unlabeled traffic allowed by default
[ 0.113658] clocksource: Switched to clocksource pit
[ 0.153559] pnp: PnP ACPI: disabled
[ 0.177195] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.177224] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.177444] NET: Registered protocol family 2
[ 0.178634] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.179276] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.179342] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.179412] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.179451] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.179755] NET: Registered protocol family 1
[ 0.180450] RPC: Registered named UNIX socket transport module.
[ 0.180464] RPC: Registered udp transport module.
[ 0.180475] RPC: Registered tcp transport module.
[ 0.180487] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.180797] PCI: CLS 32 bytes, default 32
[ 0.181134] Trying to unpack rootfs image as initramfs...
[ 1.860104] Freeing initrd memory: 8104K (cf208000 - cf9f2000)
[ 1.861190] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.865497] alix: system is recognized as "PC Engines ALIX.6 v0.99j"
[ 1.867778] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.868846] Initialise system trusted keyring
[ 1.870157] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.899952] VFS: Disk quotas dquot_6.6.0
[ 1.900381] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.906113] NFS: Registering the id_resolver key type
[ 1.906165] Key type id_resolver registered
[ 1.906178] Key type id_legacy registered
[ 1.906221] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.910015] bounce: pool size: 64 pages
[ 1.910365] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.910391] io scheduler noop registered (default)
[ 1.910416] io scheduler deadline registered
[ 1.910721] io scheduler cfq registered
[ 2.063382] r3964: Philips r3964 Driver $Revision: 1.10 $
[ 2.063412] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.318958] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 921600) is a NS16550A
[ 2.574964] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A
[ 2.577716] Non-volatile memory driver v1.3
[ 2.577985] nsc_gpio initializing
[ 2.578009] Linux agpgart interface v0.103
[ 2.578644] Failed to find cpu0 device node
[ 2.578672] Unable to detect cache hierarchy from DT for CPU 0
[ 2.614253] brd: module loaded
[ 2.627693] loop: module loaded
[ 2.629869] pata_amd 0000:00:0f.2: version 0.4.1
[ 2.633873] scsi host0: pata_amd
[ 2.634774] scsi host1: pata_amd
[ 2.635273] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.635292] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.636144] libphy: Fixed MDIO Bus: probed
[ 2.636746] usbcore: registered new interface driver usb-storage
[ 2.636883] usbcore: registered new interface driver ldusb
[ 2.637125] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.645299] i8042: No controller found
[ 2.648365] mousedev: PS/2 mouse device common for all mice
[ 2.649277] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.649350] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 2.650222] device-mapper: ioctl: 4.34.0-ioctl (2015-10-2Cool initialised: dm-devel@redhat.com
[ 2.650639] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.650766] drop_monitor: Initializing network drop monitor service
[ 2.651254] Netfilter messages via NETLINK v0.30.
[ 2.651366] nf_conntrack version 0.5.0 (3897 buckets, 15588 max)
[ 2.652474] ip_set: protocol 6
[ 2.652514] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[ 2.653355] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 2.653572] IPVS: Creating netns size=1376 id=0
[ 2.653914] IPVS: ipvs loaded.
[ 2.654732] Initializing XFRM netlink socket
[ 2.657097] NET: Registered protocol family 10
[ 2.659147] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.659178] sit: IPv6 over IPv4 tunneling driver
[ 2.660620] NET: Registered protocol family 17
[ 2.660836] NET: Registered protocol family 33
[ 2.660851] Key type rxrpc registered
[ 2.660865] Key type rxrpc_s registered
[ 2.660970] NET: Registered protocol family 37
[ 2.661057] Key type dns_resolver registered
[ 2.661085] mce: Unable to init device /dev/mcelog (rc: -5)
[ 2.661855] microcode: AMD CPU family 0x5 not supported
[ 2.661941] Using IPI Shortcut mode
[ 2.663533] registered taskstats version 1
[ 2.663574] Loading compiled-in X.509 certificates
[ 2.664769] console [netcon0] enabled
[ 2.664782] netconsole: network logging started
[ 2.669279] device-tree: Duplicate name in testcase-data, renamed to "duplicate-name#1"
[ 2.674940] ### dt-test ### start of unittest - you will see error messages
[ 2.675412] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[ 2.675464] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[ 2.675515] /testcase-data/phandle-tests/consumer-a: could not find phandle
[ 2.675555] /testcase-data/phandle-tests/consumer-a: could not find phandle
[ 2.675591] /testcase-data/phandle-tests/consumer-a: arguments longer than property
[ 2.675626] /testcase-data/phandle-tests/consumer-a: arguments longer than property
[ 2.676568] irq: no irq domain found for /testcase-data/interrupts/intc0 !
[ 2.687048] overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8
[ 2.687095] overlay_removal_is_ok: overlay #5 is not topmost
[ 2.687122] of_overlay_destroy: removal check failed for overlay #5
[ 2.698555] ### dt-test ### end of unittest - 148 passed, 0 failed
[ 2.807242] ata1.00: CFA: FIash Card, 20121024, max UDMA/100
[ 2.807264] ata1.00: 7847280 sectors, multi 0: LBA
[ 2.823142] ata1.00: configured for UDMA/100
[ 2.823809] scsi 0:0:0:0: Direct-Access ATA FIash Card 1024 PQ: 0 ANSI: 5
[ 2.825552] sd 0:0:0:0: [sda] 7847280 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 2.825956] sd 0:0:0:0: [sda] Write Protect is off
[ 2.825984] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.826162] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.827593] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.828075] ata2: port disabled--ignoring
[ 2.828579] sda: sda1 sda2 sda3 sda4
[ 2.831393] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.832030] Freeing unused kernel memory: 568K (c1867000 - c18f5000)
[ 2.832535] Write protecting the kernel text: 6108k
[ 2.832884] Write protecting the kernel read-only data: 1828k
[ 2.859013] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe5bba76289, max_idle_ns: 881590455116 ns
[ 2.859083] clocksource: Switched to clocksource tsc
[ 2.912267] udevd[1272]: starting version 181
[ 3.208958] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.231524] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.236399] ehci-pci: EHCI PCI platform driver
[ 3.236626] ehci-pci 0000:00:0f.5: EHCI Host Controller
[ 3.236673] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 3.236839] ehci-pci 0000:00:0f.5: irq 12, io mem 0xefffd000
[ 3.250760] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 3.252536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.252562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.252582] usb usb1: Product: EHCI Host Controller
[ 3.252603] usb usb1: Manufacturer: Linux 4.4.13-ZS ehci_hcd
[ 3.252622] usb usb1: SerialNumber: 0000:00:0f.5
[ 3.254762] ohci-pci: OHCI PCI platform driver
[ 3.260553] hub 1-0:1.0: USB hub found
[ 3.260626] hub 1-0:1.0: 4 ports detected
[ 3.272473] ohci-pci 0000:00:0f.4: OHCI PCI host controller
[ 3.272530] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 3.272650] ohci-pci 0000:00:0f.4: irq 12, io mem 0xefffe000
[ 3.600384] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.600412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.600433] usb usb2: Product: OHCI PCI host controller
[ 3.600453] usb usb2: Manufacturer: Linux 4.4.13-ZS ohci_hcd
[ 3.600473] usb usb2: SerialNumber: 0000:00:0f.4
[ 3.608637] hub 2-0:1.0: USB hub found
[ 3.608705] hub 2-0:1.0: 4 ports detected
[ 4.758513] ISO 9660 Extensions: RRIP_1991A
[ 5.775332] ISO 9660 Extensions: RRIP_1991A
[ 5.817330] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 5.824742] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.945656] random: nonblocking pool is initialized
[ 9.153806] udevd[2097]: starting version 181
[ 9.921155] AMD Geode RNG detected
[ 10.367361] Geode LX AES 0000:00:01.2: GEODE AES engine enabled.
[ 10.624209] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 10.762901] usb 1-3: unable to read config index 2 descriptor/start: -32
[ 10.762948] usb 1-3: chopping to 2 config(s)
[ 10.773526] usb 1-3: New USB device found, idVendor=19d2, idProduct=1225
[ 10.773576] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 10.773597] usb 1-3: Product: ZTE Mobile Broadband Station
[ 10.773616] usb 1-3: Manufacturer: ZTE,Incorporated
[ 10.778409] usb 1-3: can't set config #1, error -71
[ 10.778743] usb 1-3: USB disconnect, device number 2
[ 11.035217] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 11.112196] usb 1-3: new high-speed USB device number 3 using ehci-pci
[ 11.246225] usb 1-3: New USB device found, idVendor=19d2, idProduct=1405
[ 11.246253] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 11.246272] usb 1-3: Product: ZTE Mobile Broadband Station
[ 11.246290] usb 1-3: Manufacturer: ZTE,Incorporated
[ 11.246309] usb 1-3: SerialNumber: 1234567890ABCDEF
[ 11.250475] usb-storage 1-3:1.2: USB Mass Storage device detected
[ 11.313051] scsi host2: usb-storage 1-3:1.2
[ 11.842864] via-rhine 0000:00:09.0 eth0: VIA Rhine III (Management Adapter) at 0xd08ac000, 00:0d:b9:25:66:d4, IRQ 10
[ 11.843696] via-rhine 0000:00:09.0 eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
[ 11.930268] via-rhine 0000:00:0a.0 eth1: VIA Rhine III (Management Adapter) at 0xd08c0000, 00:0d:b9:25:66:d5, IRQ 11
[ 11.931109] via-rhine 0000:00:0a.0 eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
[ 12.316170] scsi 2:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
[ 12.323629] sr 2:0:0:0: [sr0] scsi-1 drive
[ 12.323650] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 12.324771] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 12.325377] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 12.344171] scsi 2:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
[ 12.345676] sd 2:0:0:1: Attached scsi generic sg2 type 0
[ 12.351251] sd 2:0:0:1: [sdb] Attached SCSI removable disk
[ 13.134329] cdc_ether 1-3:1.0 usb0: register 'cdc_ether' at usb-0000:00:0f.5-3, CDC Ethernet Device, 02:0c:e7:0b:01:02
[ 13.138758] usbcore: registered new interface driver cdc_ether
[ 14.609431] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 14.615467] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 15.123596] ISO 9660 Extensions: RRIP_1991A
[ 15.372291] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 16.381656] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 21.825516] Adding 131068k swap on /DB/swap-file. Priority:-1 extents:1 across:131068k FS
[ 24.979170] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.683253] capability: warning: `named' uses 32-bit capabilities (legacy support in use)
[ 28.560143] ctnetlink v0.93: registering with nfnetlink.
[ 38.025557] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 38.034785] Bridge firewalling registered
[ 38.150732] xt_ndpi v1.2 ndpi 1.7.0--0- with IPv6
[ 38.150732] bt hash size 0k gc timeout 1200 sec
[ 38.150732] sizeof hash_ip4p_node 32
[ 38.150732] sizeof id_struct 240
[ 38.150732] sizeof flow_struct 840
[ 38.150732] sizeof packet_struct 384
[ 38.150732] sizeof flow_tcp_struct 38
[ 38.150732] sizeof flow_udp_struct 18
[ 38.150732] sizeof int_one_line_struct 4
[ 38.150732] sizeof ndpi_ip_addr_t 16
[ 38.150732] sizeof ndpi_protocol 4
[ 38.150732] sizeof nf_ct_ext_ndpi 26
[ 38.150732] sizeof spinlock_t 4
[ 38.150732] NF_LABEL_WORDS 6
[ 38.150732] NF_LABEL_ID 7
[ 41.981574] tun: Universal TUN/TAP device driver, 1.6
[ 41.981595] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 42.235685] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 44.034208] via-rhine 0000:00:09.0 ETH00: renamed from eth0
[ 44.372984] via-rhine 0000:00:0a.0 ETH01: renamed from eth1
[ 44.833507] device ETH00 entered promiscuous mode
[ 45.007786] IPv6: ADDRCONF(NETDEV_UP): ETH00: link is not ready
[ 45.077691] device ETH01 entered promiscuous mode
[ 45.651103] BRIDGE00: port 2(ETH01) entered forwarding state
[ 45.651163] BRIDGE00: port 2(ETH01) entered forwarding state
[ 46.480675] IPv6: ADDRCONF(NETDEV_UP): VPN99: link is not ready
[ 50.656049] BRIDGE00: port 2(ETH01) entered forwarding state
[ 71.642796] usbcore: registered new interface driver usbserial
[ 71.643995] usbcore: registered new interface driver usbserial_generic
[ 71.646318] usbserial: USB Serial support registered for generic
[ 646.455678] usb 1-3: USB disconnect, device number 3
[ 646.455843] cdc_ether 1-3:1.0 usb0: unregister 'cdc_ether' usb-0000:00:0f.5-3, CDC Ethernet Device
[ 661.896064] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 662.034503] usb 1-3: unable to read config index 2 descriptor/start: -32
[ 662.034527] usb 1-3: chopping to 2 config(s)
[ 662.053758] usb 1-3: New USB device found, idVendor=19d2, idProduct=1225
[ 662.053784] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 662.053804] usb 1-3: Product: ZTE Mobile Broadband Station
[ 662.063191] usb 1-3: can't set config #1, error -71
[ 662.063608] usb 1-3: USB disconnect, device number 4
[ 662.400074] usb 1-3: new high-speed USB device number 5 using ehci-pci
[ 662.533899] usb 1-3: New USB device found, idVendor=19d2, idProduct=1405
[ 662.533926] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 662.533947] usb 1-3: Product: ZTE Mobile Broadband Station
[ 662.533967] usb 1-3: Manufacturer: ZTE,Incorporated
[ 662.533987] usb 1-3: SerialNumber: 1234567890ABCDEF
[ 662.544560] cdc_ether 1-3:1.0 usb0: register 'cdc_ether' at usb-0000:00:0f.5-3, CDC Ethernet Device, 02:0c:e7:0b:01:02
[ 662.547099] usb-storage 1-3:1.2: USB Mass Storage device detected
[ 662.569573] scsi host3: usb-storage 1-3:1.2
[ 663.569801] scsi 3:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
[ 663.575253] sr 3:0:0:0: [sr0] scsi-1 drive
[ 663.576464] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 663.578024] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 663.597190] scsi 3:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
[ 663.598635] sd 3:0:0:1: Attached scsi generic sg2 type 0
[ 663.605924] sd 3:0:0:1: [sdb] Attached SCSI removable disk
Top
Profilo Invia messaggio privato
m.bellizzi



Registrato: 01/09/16 17:31
Messaggi: 2

MessaggioInviato: Lun Set 05, 2016 9:08 pm    Oggetto: Rispondi citando

tutti in ferie ancora?
Top
Profilo Invia messaggio privato
Mostra prima i messaggi di:   
Nuovo argomento   Rispondi    Indice del forum -> ZeroShell Tutti i fusi orari sono GMT + 1 ora
Pagina 1 di 1

 
Vai a:  
Non puoi inserire nuovi argomenti
Non puoi rispondere a nessun argomento
Non puoi modificare i tuoi messaggi
Non puoi cancellare i tuoi messaggi
Non puoi votare nei sondaggi


Powered by phpBB © 2001, 2005 phpBB Group
phpbb.it