Indice del forum www.zeroshell.net
Distribuzione Linux ZeroShell
 
 FAQFAQ   CercaCerca  GruppiGruppi   RegistratiRegistrati 
 ProfiloProfilo  Log inLog in   Messaggi privatiMessaggi privati 

newbie: DMA timeout error

 
Nuovo argomento   Rispondi    Indice del forum -> ZeroShell
Precedente :: Successivo  
Autore Messaggio
paolone.biz



Registrato: 19/03/08 00:53
Messaggi: 11

MessaggioInviato: Mer Mar 19, 2008 1:08 am    Oggetto: newbie: DMA timeout error Rispondi citando

ciao a tutti!
sono nuovo da queste parti Wink

ho installato zeroshell su un celeron 333MHz con 256MB di ram e compact flash da 1GB Cool

volevo far due prove con queste distribuzione, ma non son tanto pratico del mondo linux...

all'avvio compare la scritta: hda: drive not ready for command
riporto in seguito il log del kernel
Codice:
00:50:14  hda: drive not ready for command
00:50:14  ide0: reset: success
00:50:14  hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
00:50:14  ide: failed opcode was: unknown
00:50:14  hda: drive not ready for command
00:50:14  hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
00:50:14  ide: failed opcode was: unknown
00:50:14  hda: drive not ready for command
00:50:14  hda1 hda2 hda3
00:50:14  hdc: ATAPI 126X DVD-ROM drive, 256kB Cache, UDMA(33)
00:50:14  Uniform CD-ROM driver Revision: 3.20
00:50:14  usbcore: registered new interface driver usbhid
00:50:14  drivers/usb/input/hid-core.c: v2.6:USB HID core driver
00:50:14  PNP: No PS/2 controller found. Probing ports directly.
00:50:14  serio: i8042 KBD port at 0x60,0x64 irq 1
00:50:14  serio: i8042 AUX port at 0x60,0x64 irq 12
00:50:14  mice: PS/2 mouse device common for all mice
00:50:14  EDAC MC: Ver: 2.0.1 Jun 15 2007
00:50:14  Netfilter messages via NETLINK v0.30.
00:50:14  ip_conntrack version 2.4 (1023 buckets, 8184 max) - 240 bytes per conntrack
00:50:14  input: AT Translated Set 2 keyboard as /class/input/input0
00:50:14  TCP cubic registered
00:50:14  Initializing XFRM netlink socket
00:50:14  NET: Registered protocol family 1
00:50:14  NET: Registered protocol family 17
00:50:14  NET: Registered protocol family 15
00:50:14  Using IPI Shortcut mode
00:50:14  RAMDISK: Compressed image found at block 0
00:50:14  Time: tsc clocksource has been installed.
00:50:14  EXT2-fs warning: checktime reached, running e2fsck is recommended
00:50:14  VFS: Mounted root (ext2 filesystem).
00:50:14  hda: dma_timer_expiry: dma status == 0x21
00:50:14  hda: DMA timeout error
00:50:14  hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
00:50:14  ide: failed opcode was: unknown
00:50:14  hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
00:50:14  ide: failed opcode was: unknown
00:50:14  hda: drive not ready for command
00:50:14  hda: dma_timer_expiry: dma status == 0x21
00:50:14  hda: DMA timeout error
00:50:14  hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
00:50:14  ide: failed opcode was: unknown
00:50:14  hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
00:50:14  ide: failed opcode was: unknown
00:50:14  hda: drive not ready for command
00:50:14  hda: dma_timer_expiry: dma status == 0x21
00:50:14  hda: DMA timeout error
00:50:14  hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
00:50:14  ide: failed opcode was: unknown
00:50:14  hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
00:50:14  ide: failed opcode was: unknown
00:50:14  hda: drive not ready for command
00:50:14  ISO 9660 Extensions: RRIP_1991A
00:50:14  loop: loaded (max 8 devices)
00:50:14  VFS: Mounted root (ext2 filesystem) readonly.
00:50:14  Trying to move old root to /initrd ... okay
00:50:14  Freeing unused kernel memory: 216k freed
00:50:14  ISO 9660 Extensions: RRIP_1991A
00:50:14  EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem as ext2
00:50:14  8139too Fast Ethernet driver 0.9.28
00:50:14  PCI: setting IRQ 7 as level-triggered
00:50:14  PCI: Found IRQ 7 for device 0000:00:0d.0
00:50:14  eth0: RealTek RTL8139 at 0xc8814000, 00:50:ba:4e:fd:45, IRQ 7
00:50:14  eth0: Identified 8139 chip type 'RTL-8139C'
00:50:14  USB Universal Host Controller Interface driver v3.0
00:50:14  PCI: setting IRQ 3 as level-triggered
00:50:14  PCI: Found IRQ 3 for device 0000:00:07.2
00:50:14  uhci_hcd 0000:00:07.2: UHCI Host Controller
00:50:14  uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
00:50:14  uhci_hcd 0000:00:07.2: irq 3, io base 0x00009000
00:50:14  usb usb1: configuration #1 chosen from 1 choice
00:50:14  hub 1-0:1.0: USB hub found
00:50:14  hub 1-0:1.0: 2 ports detected
00:50:14  libata version 2.00 loaded.
00:50:14  FAT: bogus number of reserved sectors
00:50:14  VFS: Can't find a valid FAT filesystem on dev hda3.
00:50:14  kjournald starting. Commit interval 5 seconds
00:50:14  EXT3-fs: mounted filesystem with ordered data mode.
00:50:14  FAT: bogus number of reserved sectors
00:50:14  VFS: Can't find a valid FAT filesystem on dev hda3.
00:50:14  kjournald starting. Commit interval 5 seconds
00:50:14  EXT3 FS on hda3, internal journal
00:50:14  EXT3-fs: mounted filesystem with ordered data mode.
00:50:14  process `named' is using obsolete setsockopt SO_BSDCOMPAT
00:50:14  ip_conntrack_pptp version 3.1 loaded
00:50:14  ip_nat_pptp version 3.0 loaded
00:50:22  ip_tables: (C) 2000-2006 Netfilter Core Team
00:50:24  Bridge firewalling registered
00:50:25  tun: Universal TUN/TAP device driver, 1.6
00:50:25  tun: (C) 1999-2004 Max Krasnyansky 
00:50:25  wlan: svn r3367
00:50:25  ath_hal: module license 'Proprietary' taints kernel.
00:50:25  ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
00:50:25  ath_rate_sample: 1.2 (svn r3367)
00:50:25  ath_pci: svn r3367
00:50:25  ath_pci: driver unloaded
00:50:25  ath_rate_sample: unloaded
00:50:25  ath_hal: driver unloaded
00:50:25  wlan: driver unloaded
00:50:26  ETH00: link up, 100Mbps, full-duplex, lpa 0x45E1

come lo risolvo? Rolling Eyes

poi ogni tanto compare nella shell
Citazione:
00:58:54 Id "7" respawning too fast: disabled for 5 minutes


grazie per le dritte Wink
Top
Profilo Invia messaggio privato
Mostra prima i messaggi di:   
Nuovo argomento   Rispondi    Indice del forum -> ZeroShell Tutti i fusi orari sono GMT + 1 ora
Pagina 1 di 1

 
Vai a:  
Non puoi inserire nuovi argomenti
Non puoi rispondere a nessun argomento
Non puoi modificare i tuoi messaggi
Non puoi cancellare i tuoi messaggi
Non puoi votare nei sondaggi


Powered by phpBB © 2001, 2005 phpBB Group
phpbb.it